|
UPDATED: MAY 21, 2013 HOME - CONTACT - SOCIETY - PARTS - LINKS Scalded Dog Speed Parts
A DIVISION OF YAPP STUDIOS, INC. Our Parts Are Fresh, Hot & Just YUMMY! THIS PAGE IS OUR CATALOG
YOUR ORDER Must be Phoned, Faxed or Emailed in. There is NO website shopping cart.
Office is generally open M-F, 9am to 5pm EST. Leave a clear & short phone message for a return call. Provide your Name, State, Phone number (twice) & your subject. We will call* or email you back! An Email to us will get your address on file for a quicker & easier response.
We encourage Canadian and Overseas customers to contact us during business hours. Email is excellent (best) for accurate trading of information. *We can not return overseas phone calls. HOT TIP: Send us an email so we can send back information, photos and/or an estimate or invoice. OUR CONTACT INFORMATION: SCALDED DOG SPEED PARTS 3860 CAIN RUN ROAD BATAVIA, OH 45103 USA
PHONE 513-724-0700 - FAX 513-724-0116 EMAIL: CY4FN@AOL.COM
TO PURCHASE PARTS PLEASE CONTACT OFFICE OR PRINT OUT THIS ORDER FORM AND FAX TO 513-724-0116 OR . . . MAIL TO: SCALDED DOG SPEED PARTS, 3860 CAIN RUN RD, BATAVIA, OHIO 45103, USA NEED TO ASK A QUESTION? PLEASE CONTACT US BY EMAIL ANYTIME
WE ACCEPT:
CASH - PAYPAL - BANK TRANSFERS - PERSONAL & CASHIER'S CHECKS IN U.S.D.
|
||||||||
| PARTS ARE DESIGNED TO FIT 1928-1934 FORD MODEL A & B ENGINES - UNLESS NOTED | ||||||||
|
INSTRUCTIONS Click On DETAILS or IMAGES for more information SCROLL DOWN THIS LONG PAGE TO FIND THE PARTS YOU NEED CHECK THE AVAILABILITY COLUMN TO SEE IF PART IS AVAILABLE S.O.S.S. MEMBERS MAY TAKE 10% OFF MOST PARTS. DEALERS PLEASE ENQUIRE. Prices subject to change without notice. Specifications subject to change/improve without notice. Availability subject to parts on hand. Availability: We manufacture most parts in limited numbers once or twice a year. Keep an eye on the "availability" column. Our advice is to buy NOW. Do not expect your needed part to be available later when you need it.
|
||||||||
| PART NAME | Click For More Details | Click On Artwork To See Larger Image | Price | Availability | NUMBER REQUIRED | |||
|
BLEMISHED-SCRATCH & DENT ITEMS: CLICK HERE FOR DETAILS |
||||||||
|
FUEL PUMP COVER PLATE - MODEL B FORD |
||||||||
| B-FPC | "B" FUEL PUMP BLOCK OFF COVER - GASKET NOT INCLUDED - CAST ALUNIMUM |
 |
17.95 | IN STOCK | 1 | |||
|
OIL PRESSURE RELIEF VALVE |
||||||||
| PSI-35/25 | BRASS OIL PRESSURE RELIEF VALVE - PRESET TO PSI & TESTED - 1/8" NPT x 2" TALL. ASK FOR 25 PSI OR 35 PSI |
 |
16.95 | IN STOCK | 1 | |||
| CARBURETORS | Please note: We work closely with the Stromberg 97 Company in the UK. If you need Premium Stromberg parts please ask us for a quote. | |||||||
|
WE CARRY THE ENTIRE LINE OF GENUINE
STROMBERG 97 PRODUCTS WE SPECIALIZE IN 4 BANGER APPLICATIONS. |
PLEASE CALL 513-724-0700 |
 |
LOW PRICES GREAT SERVICE |
ALLOW 2 EXTRA DAYS | ||||
|
CARBURETOR ADAPTERS |
||||||||
ADP-101
 |
CARBURETOR ADAPTER - 2 BOLT TO 3 BOLT - BOLT ON - WITH 1 OVAL GASKET. VERY NICE! | DETAILS |
 |
36.95 | IN STOCK | 1 - 3 | ||
|
PULLEYS - CRANKSHAFT - BILLET STEEL |
||||||||
| CP-D | 3.56" BILLET STEEL PULLEY - DUAL AC - SMALL - HI SPEED | DETAILS |
 |
122.95 | IN STOCK | 1 | ||
| CP-S | 3.56" BILLET STEEL PULLEY - SINGLE - SMALL - HI SPEED | DETAILS |
 |
95.95 | IN STOCK | 1 | ||
|
CP-S-5
|
5.00" BILLET STEEL PULLEY - SINGLE - LARGE - HI SPEED | DETAILS |
 |
148.95 | IN STOCK | |||
| CP-V-39 | VEE BELT - 42" OUTER CIRCLE - STOCK VINTAGE WIDTH - BEST WITH OUR 3.56" (SMALL) SPEED PULLEYS | DETAILS |
 |
20.95 | IN STOCK | 1 | ||
| CP-BW | CRANK PULLEY - BOLT & WASHER GRADE 8 (INCLUDED WITH ALL PULLEYS) - TORQUE TO 125 FT LBS. | DETAILS |
 |
9.95 | IN STOCK | 1 | ||
|
GASKETS We sell primarily "BEST" brand USA made gaskets. These fine gaskets have proven themselves to be superior to most of types used with high compression heads. Several of our gaskets are custom made to exacting standards for us by "BEST". |
||||||||
| HG-B-G1 | HEAD GASKET FITS MODEL "B" & LION SPEED HEADS & MODEL A "POLICE" ("B") HEADS - CARBON FIBER & STEEL - FIT HIGH PERFORMANCE HEADS TO .125" O.S. & COMPRESSIONS TO 7.5: "BEST BRAND" | DETAILS |
 |
45.95 | IN STOCK | 1 | ||
| HGRB-B | MODEL B FORD - REBUILD SET GASKET - W/HEAD GASKET - COMPLETE "BEST BRAND" | DETAILS |
 |
79.95 | IN STOCK | 1 | ||
| HG-T-62 | MODEL T - HEAD GASKET - SOLID COPPER - RACING COMPRESSION OVER 8:1CR - .062" THICK | DETAILS |
 |
129.95 | IN STOCK | 1 | ||
| HG- R2P |
RILEY TWO PORT - HEAD GASKET - CARBON FIBER & STEEL - CHAMBER IS CLAD IN COPPER RINGS - MAY FIT OTHER "F" OHV CONVERSIONS - DOES NOT FIT RILEY 4 PORT "BEST BRAND" |
DETAILS
|
 |
83.95 | IN STOCK | 1 | ||
| HG-101 | "F" OHV HEAD CONVERSION GASKET: ROOF CYCLONE, ROOF 101, ALEXANDER, JENKINS/ROWE AND MANY MORE. . . .CARBON FIBER & STEEL - CHAMBER IS CLAD IN STEEL RINGS. MAY FIT OTHER "F" OHV CONVERSIONS (DOES NOT FIT RILEY 2P OR 4P). CUSTOM MADE FOR US BY BEST GASKET COMPANY AND SOLD ONLY HERE. |
 |
65.95 | IN STOCK | 1 | |||
| R-FW | FIRE WIRE - (2 PCS) - S.S. - ANNEALED - .040" X 6" - HELPS SOLVE GASKET BLOWS BETWEEN CYLINDERS OF FLATHEAD AND OHV EQUIPMENT WITH EXTREME HIGH COMPRESSION RATIOS. CUT TO FIT. | 3.95 | IN STOCK | 2 PC | ||||
| R-8-GSK | RILEY - INTAKE MANIFOLD - OVAL GASKET - PAIR | DETAILS |
 |
SOLD OUT 6.95 | TEMPORARILY SOLD OUT | 2 | ||
| R-G- VC | RILEY - VALVE COVER GASKET - NEOPRENE U-CHANNEL - PAIR | DETAILS | 20.95 | IN STOCK | 1 PR | |||
| R-GN-G | RILEY - WATER GOOSENECK GASKET | DETAILS |
 |
5.95 | IN STOCK | 1 | ||
| H-GASK-1 | ONE PIECE - STEEL CLAD - HEADER GASKET | DETAILS |
 |
7.95 | IN STOCK | 1 | ||
|
EXHAUST MANIFOLDS |
||||||||
| H-Y-KIT | HEADER - SPLIT "Y" - CAST IRON - PAIR - COMPLETE SYSTEM KIT | DETAILS |
 |
389.95 | IN STOCK | 1 KIT | ||
| H-YF-KIT | HEADER - "Y’ FLANGE HARDWARE KIT (INCLUDED IN ABOVE) |
 |
17.95 | IN STOCK | 1 | |||
|
H-P-6
|
HEADER STEEL PLATE - 6 HOLES - FOR MOST APPLICATIONS |
DETAILS
|
 |
50.95 | IN STOCK | 1 | ||
|
H-P-4
|
HEADER STEEL PLATE - 4 HOLES - FOR "F" HEAD TYPE OHV CONVERSIONS |
DETAILS
|
 |
48.95 | IN STOCK | 1 | ||
| H-GASK-1 | ONE PIECE STEEL CLAD HEADER GASKET |
|
7.95 | IN STOCK | 1 | |||
|
CYLINDER HEADS - HIGH COMPRESSION Lion Speed heads are cast and machined in the USA once a year. The quality is top notch. The unchallenged power, versatility and performance of our Lions goes without question and we feel it’s worth every dime. LATEST DYNO TEST CONFIRMS - PLUGS ON LEFT HAVE MORE HP THAN VALVE SIDE! NEXT CAST IRON RUN - LATE THIS FALL FOR DELIVERY ABOUT DECEMBER 2013 |
||||||||
| BLEMISHED | BLEMISHED PRODUCT - SAVE . . . . . . . . . . . . .NONE AT THIS TIME. | DETAILS | NONE AT THIS TIME | NONE AT THIS TIME | NONE AT THIS TIME | |||
| LSH-I-65 | LION SPEED HEAD III - MODEL A/B, 6.5:1 - CAST IRON - 4 PLUG - IMPROVED CHAMBERS - CAN USE LARGE VALVES. 52 POUNDS. . . .CALL TO GET ON WAITING LIST | DETAILS |
 |
SOLD OUT AGAIN 549.95 |
LATE FALL 2013 |
1 | ||
| LSH-A-65-4 |
LION SPEED HEAD IV - MODEL A/B, 6.5CR - ALUMINUM - 4 PLUG - 8 PLUG OPTIONAL - IMPROVED CHAMBERS - CAN USE LARGER VALVES . 24 POUNDS |
DETAILS |
 |
SOLD OUT AGAIN $559.95
|
LATE FALL 2013 |
1 | ||
| LSH-A-65-8 |
LION SPEED HEAD IV-8 -
MODEL A/B, 6.5CR -
ALUMINUM -
8 PLUG -
IMPROVED CHAMBERS - CAN USE LARGER VALVES. 23 POUNDS.
|
DETAILS |
 |
644.95 2 LEFT |
IN STOCK | 1 | ||
| LSH-IV-8 | MACHINE WORK - 4 EXTRA SPARK PLUG HOLES OVER VALVES - ONLY AVAILABLE WITH LSH-A | SPECIAL ORDER | 89.95 | |||||
|
INTAKE MANIFOLDS Please note: We work closely with the Stromberg 97 Company in the UK. If you need Premium Stromberg parts please ask us for a quote. |
||||||||
| M-E-DD | MANIFOLD - "EQUALIZER" - DUAL DOWN DRAFT WITH MIXING PLENUM . . . .CALL NOW TO GET ON LIST | DETAILS |
 |
$285.95 |
IN STOCK |
1 | ||
| M-P-2 | PROGRESSIVE 2 CARB LINKAGE - STAINLESS STEEL PARTS AND DIE CAST ARMS. HIGHEST QUALITY IN THE MARKET. MADE BY STROMBERG-97 JUST FOR THE EQUALIZER or OUR "RILEY" DUAL DOWN | S.O.S.S. MEMBER DISCOUNT 5% HERE |
 |
124.95 | YES - ALLOW 2 EXTRA DAYS | 1 | ||
| M-DU | MANIFOLD - "R2P" - DUAL UPDRAFT - RAW CASTING - MUST BE MACHINED AND CARB FLANGES WELDED ON. CARB FLANGES EXTRA AND NOT INCLUDED |
 |
110.95 | IN STOCK | 1 | |||
| M-SD | MANIFOLD - "SCALDED DOG" SINGLE DOWN DRAFT - COMES WITH LINK PARTS AND INSTRUCTIONS TO MAKE BAR | DETAILS |
 |
274.95 | IN STOCK - A FEW LEFT - ALSO AT SNYDER'S & MAC'S | 1 | ||
| M-VORT | MANIFOLD - "VORTEX" - DUAL - COMES WITH LINKAGE AND INSTRUCTIONS - CAN BE USED UP OR DOWN DRAFT - | DETAILS |
 |
257.95 | IN STOCK | 1 | ||
|
SIDE PLATES |
||||||||
| AS-1 | SIDE PLATE - VALVE COVER - "A" SIZED - NO NAME - FINNED - HEAVY ALUMINUM | SOLD OUT |
 |
79.95 | TEMPORARILY SOLD OUT | 1 | ||
| AS-2 | SIDE PLATE - DRIVER’S - LOWER - "A" SIZED - FINNED - WILL FIT "B" WITH "A" OIL TUBE - ALUMINUM |
 |
58.95 | IN STOCK | 1 | |||
| AS-3-L | SIDE PLATE - DRIVER’S - UPPER LION HEAD - "A, B, T" SIZED - FINNED. MOUNT UNDER WATER INLET - ALUMINUM |
 |
58.95 | IN STOCK | 1 | |||
| R-20-A | SIDE PLATE - "RILEY SPEED POWER" - "A" SIZED - FINNED - THICK HEAVY DUTY ALUMINUM CASTING CAN BE DRILLED AND TAPPED. |
 |
89.95 |
IN STOCK |
1 | |||
| R-20-B | SIDE PLATE - "RILEY SPEED POWER" - "B" SIZED - FINNED - THICK HEAVY DUTY ALUMINUM CASTING CAN BE DRILLED AND TAPPED. |
|
89.95 |
IN STOCK |
1 | |||
| 101-SPA | SIDE PLATE - "A" - NO FINS - NO NAME - NAME PLATE CAN BE ADDED - EXTREME FINE ALUMINUM CASTINGS - HAS BOSSES FOR OIL PRESSURE. |
 |
85.95 | IN STOCK | 1 | |||
| 101-SPB | SIDE PLATE - "B" - NO FINS - NO NAME - NAME PLATE CAN BE ADDED - EXTREME FINE ALUMINUM CASTINGS HAS BOSSES FOR OIL PRESSURE. FULLY MACHINED |
 |
85.95 | IN STOCK | 1 | |||
| LSH-M | MEDALLION - LEAPING LION MEDALLION - ALUM - UNTHREADED MOUNT LUGS ON BACK |
 |
17.95 | IN STOCK | 1 - 3 | |||
| R-M | MEDALLION - OVAL - "RILEY SPEED POWER" - ALUMINUM |
 |
17.95 | IN STOCK | 1 - 3 | |||
|
VALVE TRAIN PARTS - FOR BIG VALVES AND HIGH LIFT CAMS |
||||||||
| V-SS-8 | VALVE SPRING SPACERS - 3/16" THICK - 8 PCS SET - PREVENT VALVE FLOAT WITH HIGH LIFT CAMS - BETTER TOP END PERFORMANCE BY INCREASING SPRING PSI . . . cheap power! |
 |
23.95 | IN STOCK | 1 SET | |||
| V-15-8 | VALVE SET - 1.535" DIA - INT/EXH - 8 VALVE, 8 SPRINGS, 8 GUIDES, 8 RETAINERS, 8 KEEPERS |
 |
NEW LOWER PRICE 120.95 | IN STOCK | 1 SET | |||
| V-1573-8 | VALVE SET - BIG & LITTLE: 4 EXHAUST 1.535" DIA + 4 INTAKE 1.730" DIA VALVES, 8 SPRINGS, 8 GUIDES, 8 RETAINERS, 8 KEEPERS |
|
NEW LOWER PRICE 125.95 | IN STOCK | 1 SET | |||
| V-73-4 | VALVE SET - 1.730"DIA - INTAKE - SET OF 4 VALVES, GUIDES, RETAINERS, KEEPERS . . THESE ARE THE BIG VALVES TO USE FOR MORE HP AT THE INTAKES. Requires additional port machine work. |
|
NEW LOWER PRICE 72.92 | IN STOCK | 1 SET | |||
| VP-1 | VALVE PLUG - OHV - ALL "F" HEAD OHV - FOR OIL RETURN AND GASKET SUPPORT. REPLACES BLOCK'S INTAKE VALVE IN "F" HEAD OHVs. |
 |
13.95/1 45.95/4 |
IN STOCK | 4 - 8 | |||
|
WATER CONNECTIONS |
||||||||
| SD-WI | WATER INLET - WITH SENSOR - HOT WATER BOSS - ALUMINUM | DETAILS |
 |
45.95 | 2 IN STOCK | 1 | ||
| WB-F | WATER BLOCK OFF - FINNED - FITS MODEL A FLATHEADS - REQUIRED WITH WPA-A | DETAILS |
 |
17.95 | IN STOCK | 1 | ||
| WB-R | WATER BLOCK OFF - FINNED - FITS ONLY RILEY TWO PORT OHV - REQUIRED WITH WPA-A | DETAILS |
 |
17.00 | IN STOCK | 1 | ||
| WPA-A | WATER PUMP ADAPTER - 1932-36 V8 PUMP TO "A" HEAD | DETAILS |
 |
45.95 | IN STOCK | 1 | ||
| R-5 | WATER GOOSE NECK - ONLY FITS "RILEY TWO PORT" OHV CONVERSION | DETAILS |
 |
89.95 | IN STOCK | 1 | ||
|
IGNITION PARTS & SYSTEMS |
||||||||
| IGN-AB-12 |
FOR ALL MODEL
A OR B FORDS F.S.I. PERFORMANCE CENTRIFUGAL ELECTRONIC DISTRIBUTOR - - CCW ROTATION - COMPLETE WITH COIL - READY TO INSTALL - 12V
|
 |
294.95 | IN STOCK | 1 | |||
| FRONT TIMING COVER IGNITION SYSTEM | ||||||||
| FCIS-01 |
FRONT TIMING COVER IGNITION SYSTEM - COMPLETE KIT - ASSEMBLED - PARTS STARED* BELOW ARE IN KIT |
DETAILS |
 |
499.95 | IN STOCK | 1 | ||
| FCIS-D-1 |
DISTRIBUTOR - STANDARD - POINTS TYPE - CW ROTATION - COMPLETE (NO COIL) - 6V OR 12V - FITS OUR TIMING COVER ONLY COMES WITH EXTRA POINTS AND 32 DEG ADVANCE SPRINGS. EQUAL CAM LOBES. |
 |
76.95 | IN STOCK | 1 | |||
| FCIS-D-C12 | COIL - 12 VOLT (NO BRACKET) | 28.50 | IN STOCK | 1 | ||||
| FCIS-D-2 |
FOR THE "FRONT
COVER SYSTEM" DISTRIBUTOR - HI-PERFORMANCE - F.S.I. - CW ROTATION - ELECTRONIC - CENTRIFUGAL DISTRIBUTOR - COMPLETE WITH 12V COIL AND READY TO INSTALL - FITS OUR TIMING COVER ONLY - CW ROTATION. |
|
SPECIAL ORDER | 1 | ||||
| FCIS-02 | CAMSHAFT LOCKNUT AND GEAR ASSEMBLY* | DETAILS |
 |
90.95 | IN STOCK | 1 | ||
| FCIS-03 | CAMSHAFT DRIVE GEAR * | 25.95 | IN STOCK | 1 | ||||
| FCIS-04 | DISTRIBUTOR DRIVE SHAFT * |
 |
45.95 | IN STOCK | ||||
| FCIS-04-ASM | DISTRIBUTOR DRIVE SHAFT ASSEMBLY: SHAFT, 2 BEARINGS, PINION GEAR, PIN)* |
 |
80.95 | IN STOCK | 1 | |||
| FCIS-05 | DRIVE SHAFT PINION GEAR * |
 |
25.95 | IN STOCK | 1 | |||
| FCIS-06 | DRIVE SHAFT PINION GEAR LOCK PIN * | .50 | IN STOCK | 1 | ||||
| FCIS-07 | UPPER BRONZE BEARING * | 9.95 | IN STOCK | 1 | ||||
| FCIS-08-1 | UPPER BEARING LOCK SCREW * | .50 | IN STOCK | 1 | ||||
| FCIS-08 | LOWER BRONZE BEARING * | 5.95 | IN STOCK | 1 | ||||
| FCIS-10 | CAMSHAFT THRUST BRASS BOLT * | 12.95 | IN STOCK | 1 | ||||
| FCIS-11 | CAMSHAFT THRUST JAM NUT * | 2.00 | IN STOCK | 1 | ||||
| FCIS-12 | DISTRIBUTOR LOCK BOLT * | 1.00 | IN STOCK | 1 | ||||
| FCIS-13 | DISTRIBUTOR LOCK JAM NUT * | 1.00 | IN STOCK | 1 | ||||
| FCIS-TG | TIMING COVER GASKET* "BEST BRAND" - 0.019" THICK | 4.95 | IN STOCK | 1 | ||||
| FCIS-14 | FREEZE PLUG TO TEMP SEAL HEAD'S DISTRIBUTOR HOLE * | 2.00 | IN STOCK | 1 | ||||
| WINGED SPEED CAPS AND WIRE KITS | ||||||||
| W-CST | WING BODY, CAP AND ROTOR WITH SPARK PLUG TIPS - CUSTOM MADE SET - FIT STOCK MODEL A & B FORD AND FSI "ZIPPER" BRAND DISTRIBUTORS - NO WIRES | DETAILS |
 |
68.95 | IN STOCK | 1 SET | ||
| W-LSH | WINGED BODY, CAP, ROTOR & CLOTH WIRE SET - LION SIZED - SET - FIT STOCK MODEL A & B FORD AND FSI "ZIPPER" BRAND DISTRIBUTORS | DETAILS |
 |
89.95 | IN STOCK | 1 SET | ||
| W-LSH-W | WIRE SET ONLY - FITS LION HEAD - YELLOW CLOTH - SOLID COPPER CORE - 5 WIRES/ENDS. | 32.95 |
SPECIAL ORDER |
1 SET | ||||
|
RILEY TWO PORT (tm) OHV CONVERSION & PARTS |
||||||||
| R-1-7 |
RILEY TWO PORT - OHV - CONVERSION KIT - 6.5 CR PRODUCTION TO BEGIN SEPTEMBER 2013. DEPOSIT $1500 NOW . . .DELIVERY ABOUT MARCH 2014 . . .PLAN AHEAD AND OWN ONE OF THE COOLEST AND POWERFUL OHV FOUR PORT CONVERSION EVER MADE. |
DETAILS |
 |
NOW
4,550.00 5,250.00 LATER |
PRODUCTION STARTING NOW ACCEPTING DEPOSITS |
1 | ||
| R-INSTR | RILEY - INSTRUCTION BOOKLET - COVERS HISTORY & INSTALLATION | 15.00 | IN STOCK | 1 | ||||
| R-6-0P2 | RILEY - DISTRIBUTOR RISER - MACHINED FOR OIL PRESSURE - INCLUDES TAPPED COMPRESSION FITTING, LOCKER SCREW AND JAM NUT. |
 |
78.95 | IN STOCK | 1 | |||
| R-6-OR | RILEY - OIL RESTRICTOR - BLANK (2 PCS) - YOU DRILL TO SIZE - .060" RECOMMENDED | 3.95 | IN STOCK | 1 | ||||
| R-6-COMP | RILEY - OIL COMPRESSION FITTING - 90 DEG - TAPPED FOR RESTRICTOR | 6.95 | IN STOCK | |||||
| R-6-A | RILEY - DISTRIBUTOR DRIVE SHAFT | 22.95 | IN STOCK | 1 | ||||
| R-12-L | RILEY - HEAD STUD - LONG - GRADE 8 - ROLLED THREADS | 6.95 | IN STOCK | 4 | ||||
| R-12-BS | RILEY - HEAD BOLT SET - REPLACES STUD KITS - GRADE 8 (10 PCS) + 4 LONG STUDS - SIZED FOR YAPP REPRO HEADS - FULL STUDS KITS ARE DISCONTINUED. | 86.95 | IN STOCK | 1 | ||||
| R-7-NN | RILEY - INTAKE PORT COVER - NO NAME - EA |
 |
14.95 | IN STOCK | 2 | |||
| R-15-SB | RILEY - PUSH ROD SEAT BOLTS (4 PCS) | 9.95 | IN STOCK | 1 SET | ||||
|
R-15-C |
RILEY - PUSH ROD - SOLID - 1 COMPLETE UNIT (3 PCS) | 38.95 | IN STOCK | 4 | ||||
| R-15 | RILEY - PUSH ROD - SOLID (1 PC) | 25.95 | IN STOCK | 4 | ||||
| R-15-B1 | RILEY - PUSH ROD - TOP ADJUST NUT & JAM NUT - 2PCS | 18.95 | IN STOCK | 4 | ||||
| R-2-3 | RILEY - ROCKER STANDS (2) WITH ADJUSTABLE ROCKER ARMS (4) - CONVERSION KIT - RETRO FITS TO ALL ORIGINAL AND REPRO RILEY 2 PORT HEADS - COMPLETE. * ITEMS IN KIT |
 |
874.95 | IN STOCK | 1 | |||
| R-2-SET | RILEY - ROCKER ARM SET (4) COMPLETE SET WITH NEEDLE BRGS, ALL HARDWARE, TO REPLACE ORIGINAL OR BRONZE ROCKERS. R-4-T REQUIRED. FIT 5/8" SHAFT ONLY. |
 |
624.95 | IN STOCK | 1 | |||
| R-3-AB | RILEY - ROCKER ARM - ADJUSTER BOLT -10MM* | 17.95 | IN STOCK | 8 | ||||
| R-3-JN | RILEY - ROCKER ARM - JAM NUT - 10MM* | 1.00 | IN STOCK | 8 | ||||
| R-3-D-M | RILEY - ROCKER ARM - ADJUSTABLE - DUCTILE IRON - MACHINED* THIS PRICE IS FOR ONLY THE MACHINED CASTING. | 125.95 | IN STOCK | 4 | ||||
| R-3-B RILEY | RILEY - ROCKER ARM - BUSHING - OBSOLETE (#1- #61 HEADS USE THESE) | 4.95 | IN STOCK | 2 - 8 | ||||
| R-3-LW | RILEY - ROCKER ARM - LOCK WASHER (SPECIAL NOR LOCK)* | 2.95 | IN STOCK | 8 | ||||
| R-3-BRG | RILEY - ROCKER ARM NEEDLE BEARING - 2 PER ROCKER* | 13.50 | IN STOCK | 2 - 8 | ||||
| R-2-SHFT | RILEY - ROCKER SHAFT 5/8" DIA. (YAPP R2P USE THIS SIZE)* | 36.95 | IN STOCK | 4 | ||||
| R-2-NOS | RILEY - ROCKER SHAFT 9/16" DIA. - NOS (ORIGINAL SIZE) GEO. RILEY USED PISTON PINS | 20.95 | IN STOCK | 4 | ||||
| R-2-BLT | RILEY - ROCKER STAND BOLT - 3.50" + FLAT WASHER* | 2.95 | IN STOCK | 4 | ||||
| R-2 | RILEY - ROCKER STAND - MACHINED* | 110.95 | IN STOCK | 2 | ||||
| R-4-S | RILEY - VALVE COVER - SHORT - ORIGINAL SIZE - STUD BOSS IS CENTERED. |
 |
62.95 | IN STOCK | 2 | |||
| R-4-T | RILEY - VALVE COVER - TALL - USED WITH ADJUSTABLE ROCKERS* |
|
85.95 | IN STOCK | 2 | |||
| R-5 | RILEY - WATER GOOSE NECK |
 |
89.95 | IN STOCK | 1 | |||
| R-WN | RILEY - VALVE COVER WING NUT & SEALING WASHER (2 PC) SET | 11.95 | IN STOCK | 1 SET | ||||
| R-WN-W | RILEY- VC SEALING WASHER - EACH | 1.00 | IN STOCK | 2 | ||||
|
ROOF 101 CYCLONE FOUR PORT OHV |
||||||||
| 101-1 |
ROOF 101
CYCLONE 4 PORT OHV
CONVERSION - 6.5:1 CR KIT
PRODUCTION STARTING SOON Deposit of $1500.00 required to get a finished head. Deposits will be collected starting July, 2013. Delivery (+-) March, 2014. Balance due 30 days prior to shipping. |
DETAILS |
 |
NOW
4,550.00 5,250.00 LATER |
PRODUCTION STARTING NOW ACCEPTING DEPOSITS |
1 KIT | ||
| 101-07 | ROOF 101 CYCLONE INSTRUCTION BOOK | 15.95 | IN STOCK | 1 | ||||
| 101-08 | ROOF - 4 PORT INTAKE MANIFOLD - 3 CARBS PLUS WATER JACKET - OWNERS ONLY |
 |
280.00 | SOLD OUT | 1 | |||
| 101-08.1 | ROOF - 101 - MANIFOLD CARBURETOR MOUNT COVERS | 20.00 | IN STOCK | 1 - 3 | ||||
| 101-03 | ROOF - DISTRIBUTOR RISER - MACHINED - REQUIRES 101-03-2 | 75.00 | IN STOCK | 1 | ||||
| 101-03-2 | ROOF - DIST RISER DRIVE SHAFT - LONG - USED WITH 101-03 | 24.00 | IN STOCK | 1 | ||||
| 101-03.1 | ROOF - DISTRIBUTOR DRIVE SHAFT - SHORT | 22.00 | IN STOCK | 1 | ||||
| 101-10.1 | ROOF - NAME PLATE MEDALLION - BLUE & BRASS CLOISONNÉ - *FOR 101 OWNERS ONLY (THIS PLATE IS RETIRED) | RETIRED | 1 - 4 | |||||
| 101-02.2 | ROOF - ROCKER STUD | 23.00 | IN STOCK | 4 | ||||
| 101-02.3 | ROOF - PUSH ROD - SOLID | 25.00 | IN STOCK | 4 | ||||
| 101-02.4 | ROOF - PUSH ROD GUIDE PLATE | 17.00 | IN STOCK | 4 | ||||
| 101-02.6 | ROOF - PUSH ROD SEAT BOLT - 3/8-24 X1-1/4" - (4 PCS) | 9.00 | IN STOCK | 1 SET | ||||
| 101-02.7 | ROOF - CHROME ACORN NUT & SEALING WASHER (2 PCS) | 4.00 | IN STOCK | 4 | ||||
| 101-02.9 | ROOF - ROLLER ROCKER ARM - 1.5:1 RATIO - BALL, POLYLOCK, AND JAM NUT | 19.00 | IN STOCK | 4 | ||||
| 101-02.12 | ROOF - VALVE SPRING - SPECIAL | 6.00 | IN STOCK | 8 | ||||
| 101-01.02 | ROOF - HEAD STUD KIT - 14 PCS GRADE 8 | 89.00 | IN STOCK | 1 SET | ||||
| 101-01.05 | ROOF - ROCKER BOX TO HEAD ALIGNMENT SHOULDER BOLT | 8.50 | IN STOCK | 6 | ||||
| 101-05.01 | ROOF - GASKET - INTAKE MANIFOLD TO ROCKER BOX - 4 PCS | DETAILS | 6.50 | IN STOCK | 1 SET | |||
|
101-05.02 |
ROOF - GASKET "F" CYLINDER HEAD - "BEST" - SPECIAL GASKET
FITS THE ROOF 101
|
DETAILS |
|
62.50 | IN STOCK | |||
|
101-05.03 |
ROOF - GASKET - WATER PUMP - B |
DETAILS | 3.00 | IN STOCK | ||||
|
101.05.04 |
ROOF - GASKET - CARBURETOR TO MANIFOLD - OVAL TWO BOLT |
DETAILS |
|
3.00 | TEMPORARILY OUT OF STOCK | |||
|
101.05.05 |
ROOF - GASKET - O-RING SET - 10 PCS |
DETAILS |
 |
12.00 | IN STOCK | |||
|
101-05.09 |
ROOF - GASKET - FIRE WIRE -2 PCS |
3.00 | IN STOCK | |||||
|
101-04 |
PORT COVERS - NO NAME - ALL "F" HEADS |
|
13.50 | IN STOCK | ||||
|
101-02.17 |
VALVE PLUGS - ALL "F" HEADS |
|
13.50 | IN STOCK | ||||
