| UPDATED 1-20-2012 | |||||||||||
|
Scalded Dog Speed Parts
Our Parts Are Fresh, Hot & Just YUMMY!
SCALDED DOG SPEED PARTS, 3860 CAIN RUN RD, BATAVIA, OH 45103 PHONE 513-724-0700 - FAX 513-724-0116 - EMAIL: CY4FN@AOL.COM WE ACCEPT:
PAYPAL - PERSONAL CHECKS A DIVISION OF YAPP STUDIOS, INC.
|
|||||||||||
| ALL PARTS ARE DESIGNED TO FIT 1928-1934 FORD MODEL A & B ENGINES UNLESS NOTED | |||||||||||
|
INSTRUCTIONS Click On DETAILS for more information THIS LISTS SHOWS PARTS THAT WE MAKE AND STOCK. WE ALSO SELL A FEW PARTS MADE BY FRIENDS THAT ARE EXCEPTIONAL SCROLL DOWN THIS LONG PAGE TO FIND THE PARTS YOU NEED CHECK BACK OFTEN FOR UPDATES AND NEWS CHECK TO SEE IF PART IS AVAILABLE CLICK ON IMAGES TO SEE A LARGER PHOTO CLICK ON "DETAILS" TO SEE MORE SPECS NOTE HOW MANY PARTS ARE REQUIRED IN LAST COLUMN TO PURCHASE PARTS: CALL OFFICE: 513-724-0700 OR . . . . PRINT OUT ORDER FORM AND FAX TO 513-724-0116 OR . . . . MAIL TO: SCALDED DOG SPEED PARTS, 3860 CAIN RUN RD, BATAVIA, OHIO 45103, USA NEED TO ASK A QUESTION? PLEASE CONTACT US BY EMAIL ANYTIME [CONTACT] WE WILL DO OUR BEST TO GET BACK QUICKLY OR PHONE OFFICE 513-724-0700 M-F 9AM TO 5PM EST DEALERS PLEASE ENQUIRE. S.O.S.S. MEMBERS MAY TAKE 10% OFF ALL PARTS EXCEPT OHV KITS.
|
|||||||||||
| Part Number | PART NAME | More Details | Click On Artwork To See Larger Image | Price | Availability | Add To Cart | NUMBER REQUIRED | ||||
|
FUEL PUMP COVER PLATE - MODEL B FORD S.O.S.S. MEMBERS MAY TAKE 10% OFF ALL PARTS EXCEPT OHV KITS. |
|||||||||||
| B-FPC | "B" FUEL PUMP BLOCK OFF COVER - GASKET NOT INCLUDED |
 |
17.00 | YES | 1 | ||||||
|
OIL PRESSURE RELIEF VALVE S.O.S.S. MEMBERS MAY TAKE 10% OFF ALL PARTS EXCEPT OHV KITS. |
|||||||||||
| PSI-35/25 | BRASS OIL PRESSURE RELIEF VALVE - PRESET TO PSI & TESTED - 1/8" NPT x 2" TALL. ASK FOR 25 PSI OR 35 PSI |
 |
16.50 | YES | 1 | ||||||
|
CARBURETOR ADAPTERS |
|||||||||||
| ADP-3 | CARBURETOR ADAPTER - FORD THREE BOLT - WELD INTO YOUR MANIFOLD - HEAVY DUTY THICK CASTING |
 |
20.00 | LIMITED | 1 - 3 | ||||||
| ADP-W | CARBURETOR ADAPTER - WINFIELD/ZENITH - WELD TO YOUR MANIFOLD - HEAVY DUTY THICK CASTING |
 |
20.00 | LIMITED | 1 - 3 | ||||||
| ADP-101 | CARBURETOR ADAPTER - 2 BOLT TO 3 BOLT - BOLT ON - WITH 1 OVAL GASKET. VERY NICE! |
 |
36.00 | YES | 1 - 3 | ||||||
| ADP-101-U | CARBURETOR ADAPTER - 2 BOLT TO 3 BOLT OR 4 BOLT - UNIVERSAL BOLT ON - WITH 2 GASKETS AND STUD/BOLTS |
 |
35.00 | YES | 1 - 3 | ||||||
|
PULLEYS - CRANKSHAFT - BILLET STEEL S.O.S.S. MEMBERS MAY TAKE 10% OFF ALL PARTS EXCEPT OHV KITS. |
|||||||||||
| CP-BW | CRANK PULLEY - BOLT & WASHER GRADE 8 (INCLUDED WITH ALL PULLEYS) - TORQUE TO 125 FT LBS. |
 |
9.00 | YES | 1 | ||||||
| CP-D | CRANKSHAFT PULLEY DUAL - SOLID BILLET STEEL - DUAL GROOVE - HIGH SPEED - DESIGNED FOR AIR CONDITIONING & ACCESSORIES - REDUCES PUMP SPEED BY 30% TO REDUCE AIR FOAM AND WATER OVERFLOW - BALANCED - HAS TIMING MARKS ENGRAVED ON FACE. . . . VERY HIGH QUALITY | DETAILS |
 |
122.00 | YES | 1 | |||||
| CP-S | CRANKSHAFT PULLEY SINGLE - SOLID BILLET STEEL - SINGLE GROOVE - HIGH SPEED - REDUCES PUMP SPEED BY 30% TO REDUCE AIR FOAM AND WATER OVERFLOW - BALANCED - HAS TIMING MARKS ENGRAVED ON FACE . . . VERY HIGH QUALITY | DETAILS |
 |
95.00 | YES | 1 | |||||
| CP-V-39 | VEE BELT - 42" OUTER CIRCLE - STOCK WIDTH - BEST WITH OUR PULLEYS | 20.00 | YES | 1 | |||||||
|
GASKETS S.O.S.S. MEMBERS MAY TAKE 10% OFF ALL PARTS EXCEPT OHV KITS. |
|||||||||||
| HG-B-G1 |
HEAD GASKET FITS
MODEL "B" & LION SPEED HEADS & MODEL A
"POLICE" HEADS -
CARBON
FIBER & STEEL - FIT HIGH PERFORMANCE HEADS TO .125" O.S. &
COMPRESSIONS TO 7.5:1 "BEST BRAND" |
DETAILS |
 |
45.00 | YES | 1 | |||||
| HGRB-B |
MODEL B FORD - REBUILD SET
GASKET - W/HEAD GASKET
- COMPLETE "BEST BRAND" |
DETAILS |
 |
79.00 | YES | 1 | |||||
| HG-P-62 | MODEL A & B - HEAD GASKET - SOLID COPPER - RACING COMPRESSION OVER 8:1CR - .062" THICK | DETAILS |
 |
130.00 | SPECIAL ORDER ONLY | 1 | |||||
| HG-T-62 | MODEL T - HEAD GASKET - SOLID COPPER - RACING COMPRESSION OVER 8:1CR - .062" THICK | DETAILS |
 |
130.00 | YES - LIMITED | 1 | |||||
| HG- R2P-101 |
RILEY TWO PORT - HEAD GASKET - CARBON FIBER & STEEL - CHAMBER IS CLAD IN COPPER RINGS - MAY FIT OTHER "F" OHV CONVERSIONS - DOES NOT FIT RILEY 4 PORT "BEST BRAND" |
DETAILS
|
 |
83.50 | YES | 1 | |||||
|
ROOF - HEAD GASKET - ROOF 101 CYCLONE - CARBON FIBER & STEEL
-
CHAMBER IS CLAD IN STEEL RINGS. MAY FIT OTHER "F" OHV CONVERSIONS
(DOES NOT FIT R2P). "BEST BRAND" |
 |
65.00 | YES | ||||||||
| R-FW | FIRE WIRE GASKET - RILEY & ROOF - (2 PCS) - S.S. - ANNEALED - .040" X 6" | 2.50 | YES | 2 PC | |||||||
| R-8-GSK | RILEY - INTAKE MANIFOLD - OVAL GASKET | DETAILS |
 |
3.00 | YES | 2 | |||||
| R-G- VC | RILEY - VALVE COVER GASKET - NEOPRENE U-CHANNEL - PAIR | DETAILS | 20.00 | YES | 1 PR | ||||||
| R-GN-G | RILEY - WATER GOOSENECK GASKET | DETAILS |
 |
5.00 | YES | 1 | |||||
|
EXHAUST MANIFOLDS S.O.S.S. MEMBERS MAY TAKE 10% OFF ALL PARTS EXCEPT OHV KITS. |
|||||||||||
| H-Y-KIT | HEADER - SPLIT "Y" - CAST IRON - PAIR - COMPLETE SYSTEM KIT | DETAILS |
 |
SOLD OUT | SOLD OUT | 1 KIT | |||||
| H-F-KIT | HEADER - "Y’ FLANGE HARDWARE KIT (INCLUDED IN ABOVE) |
 |
17.00 | YES | 1 | ||||||
| H-G | HEADER - STEEL ONE PIECE GASKET - EXCELLENT FOR HEADERS OF ALL KINDS |
 |
7.50 | YES | 1 | ||||||
|
CYLINDER HEADS - HIGH COMPRESSION S.O.S.S. MEMBERS MAY TAKE 10% OFF ALL PARTS EXCEPT OHV KITS. Lion Speed heads are cast and machined in the USA. The quality is top notch. The unchallenged power, versatility and performance of our Lions goes without question and we feel it’s worth every dime. But to make a go of these there must be a profit. At present the profit is too low to continue producing . . . we are looking for a more economical production process. In the meantime take a look at our Riley Two Port one of the world's most successful OHV conversions for Model A Fords.
|
|||||||||||
| LSH-I-65 |
LION SPEED HEAD III -
MODEL A/B, 6.5:1 -
CAST IRON - 4 PLUG -
IMPROVED CHAMBERS - CAN USE LARGER VALVES. Click DETAILS To See Progress Report
|
DETAILS |
 |
549.00
|
YES DELIVERY EXPECTED FEB 2012 (+ -) |
1 | |||||
| LSH-A |
LION SPEED HEAD IV - MODEL A/B, 6.5CR - ALUMINUM - 8 PLUG OPTIONAL - IMPROVED CHAMBERS - CAN USE LARGER VALVES Aluminum head is Sold Out. We only made few. Appears to be more interest than anticipated. |
DETAILS |
 |
SOLD OUT |
DELIVERY EXPECTED FEB 2012 (+ -) | 1 | |||||
| LSH-A-MW | MACHINE WORK - 4 EXTRA SPARK PLUG HOLES OVER VALVES - ONLY AVAILABLE WITH LSH-A | 89.00 | ONLY WITH ORDER OF LSH-A | ||||||||
| LIZ-65 | LIZARD HEAD - MODEL T HIGH PERFORMANCE CYLINDER HEAD - THIS PRODUCT IS IN RETIREMENT | NOT AVAILABLE |
 |
RETIRED | RETIRED | 1 | |||||
|
INTAKE MANIFOLDS |
|||||||||||
| M-E-DD |
MANIFOLD - "EQUALIZER" - DUAL DOWN DRAFT WITH MIXING
PLENUM Price going up to after existing stock is sold. |
DETAILS |
 |
235.00 GOING UP TO 285.00 |
YES |
1 | |||||
| M-P-2 | PROGRESSIVE 2 CARB LINKAGE - STAINLESS STEEL PARTS AND DIE CAST ARMS. HIGHEST QUALITY IN THE MARKET. MADE BY STROMBERG-97 JUST FOR THE EQUALIZER or OUR "RILEY" DUAL DOWN | SOSS DISCOUNT 5% |
 |
124.95 | YES - ALLOW 8 DAYS | ||||||
| M-DU | MANIFOLD - "R2P" - DUAL UPDRAFT - RAW CASTING - MUST BE MACHINED AND CARB FLANGES WELDED ON. CARB FLANGES EXTRA AND NOT INCLUDED |
 |
110.00 | YES | 1 | ||||||
| M-SD | MANIFOLD - "SCALDED DOG" SINGLE DOWN DRAFT - COMES WITH LINK PARTS AND INSTRUCTIONS TO MAKE BAR | DETAILS |
 |
265.00 | YES | 1 | |||||
| M-VORT | MANIFOLD - "VORTEX" - DUAL - COMES WITH LINKAGE AND INSTRUCTIONS - CAN BE USED UP OR DOWN DRAFT | DETAILS |
 |
257.00 | YES | 1 | |||||
|
SIDE PLATES - ALUMINUM |
|||||||||||
| AS-1 | SIDE PLATE - VALVE COVER - "A" SIZED - NO NAME - FINNED - HEAVY ALUMINUM |
 |
79.00 | YES | 1 | ||||||
| AS-2 | SIDE PLATE - DRIVER’S - LOWER - "A" SIZED - FINNED - WILL FIT "B" WITH "A" OIL TUBE - ALUMINUM |
 |
58.00 | YES | 1 | ||||||
| AS-3-L | SIDE PLATE - DRIVER’S - UPPER LION HEAD - "A, B, T" SIZED - FINNED. MOUNT UNDER WATER INLET - ALUMINUM |
 |
58.00 | YES | 1 | ||||||
| R-20-A | SIDE PLATE - "RILEY SPEED POWER" - "A" SIZED - FINNED - THICK HEAVY DUTY ALUMINUM CASTING CAN BE DRILLED AND TAPPED. |
 |
89.00 | YES | 1 | ||||||
| R-20-B | SIDE PLATE - "RILEY SPEED POWER" - "B" SIZED - FINNED - THICK HEAVY DUTY ALUMINUM CASTING CAN BE DRILLED AND TAPPED. |
|
89.00 | YES | 1 | ||||||
 |
101-SPA | SIDE PLATE - "A" - NO FINS - NO NAME - NAME PLATE CAN BE ADDED - EXTREME FINE ALUMINUM CASTINGS - HAS BOSSES FOR OIL PRESSURE. |
 |
85.00 | YES | 1 | |||||
|
|
101-SPB | SIDE PLATE - "B" - NO FINS - NO NAME - NAME PLATE CAN BE ADDED - EXTREME FINE ALUMINUM CASTINGS HAS BOSSES FOR OIL PRESSURE. FULLY MACHINED |
 |
85.00 | YES | 1 | |||||
| LSH-M | MEDALLION - LEAPING LION MEDALLION - ALUM - MOUNT LUGS ON BACK |
 |
17.00 | YES | 1 - 3 | ||||||
| R-M | MEDALLION - OVAL - "RILEY SPEED POWER" - ALUMINUM |
 |
17.00 | YES | 1 - 3 | ||||||
|
VALVE TRAIN PARTS |
|||||||||||
| V-SS-8 | VALVE SPRING SPACERS - 3/16" THICK - 8 PCS SET - PREVENT VALVE FLOAT WITH HIGH LIFT CAMS - BETTER TOP END PERFORMANCE BY INCREASING SPRING PSI . . . cheap power! |
 |
23.00 | YES | 1 SET | ||||||
| V-15-8 | VALVE SET 1.535" DIA - INT/EXH - 8 VALVE, 8 SPRINGS, 8 GUIDES, 8 RETAINERS, 8 KEEPERS - SET |
 |
156.00 | YES | 1 SET | ||||||
| V-15-4 | VALVE SET 1.535"DIA - INT/EXH - 4 VALVE KIT - SET |
|
95.00 | YES | 1 SET | ||||||
| V-73-4 | VALVE SET 1.730"DIA - INTAKE - 4 VALVE - SET |
|
95.00 | YES | 1 SET | ||||||
| VP-1 | VALVE PLUG - OHV - ALL "F" HEAD OHV - FOR OIL RETURN AND GASKET SUPPORT. REPLACES INT. VALVE IN "F" HEAD OHVs. |
 |
13.50/1 45.00/4 |
YES | 4 | ||||||
|
WATER CONNECTIONS |
|||||||||||
| SD-WI | WATER INLET - WITH SENSOR - HOT WATER BOSS - ALUMINUM | DETAILS |
 |
45.00 | YES | 1 | |||||
| WB-F | WATER BLOCK OFF - FINNED - FITS MODEL A FLATHEADS - REQUIRED WITH WPA-A | DETAILS |
 |
17.00 | YES | 1 | |||||
| WB-R | WATER BLOCK OFF - FINNED - FITS ONLY RILEY TWO PORT OHV - REQUIRED WITH WPA-A | DETAILS | 17.00 | YES | 1 | ||||||
| WPA-A | WATER PUMP ADAPTER - 1932-36 V8 PUMP TO "A" HEAD | DETAILS |
 |
45.00 | YES | 1 | |||||
| R-5 | WATER GOOSE NECK - ONLY FITS "RILEY TWO PORT" OHV CONVERSION | DETAILS |
 |
89.00 | YES | 1 | |||||
|
IGNITION PARTS & SYSTEMS |
|||||||||||
| IGN-AB-12 |
FOR ALL MODEL
A OR B FORDS F.S.I. PERFORMANCE CENTRIFUGAL ELECTRONIC DISTRIBUTOR - - CCW ROTATION - COMPLETE WITH COIL - READY TO INSTALL
|
 |
294.00 | YES | 1 | ||||||
| FRONT TIMING COVER IGNITION SYSTEM | |||||||||||
|
FCIS-01 |
FRONT TIMING COVER IGNITION SYSTEM - COMPLETE KIT - ASSEMBLED - PARTS STARED* BELOW ARE IN KIT |
DETAILS
|
 |
489.00 | CALL - CAN MACHINE FOR YOU | 1 | |||||
| FCIS-D-1 |
DISTRIBUTOR - STANDARD - POINTS TYPE - CW ROTATION - COMPLETE (NO COIL) - 6V OR 12V - FITS OUR TIMING COVER ONLY COMES WITH EXTRA POINTS AND 32 DEG ADVANCE SPRINGS. EQUAL CAM LOBES. |
 |
 |
76.50 | YES | 1 | |||||
| FCIS-D-C12 | COIL - 12 VOLT (NO BRACKET) | 28.50 | YES | ||||||||
| FCIS-D-2 |
FOR THE "FRONT
COVER SYSTEM" DISTRIBUTOR - HI-PERFORMANCE - F.S.I. - CW - ELECTRONIC - CENTRIFUGAL DISTRIBUTOR - COMPLETE WITH 12V COIL AND READY TO INSTALL - FITS OUR TIMING COVER ONLY |
|
|
205.00 | YES | 1 | |||||
| FCIS-02 | CAMSHAFT LOCKNUT AND GEAR ASSEMBLY* |
 |
90.00 | YES | 1 | ||||||
| FCIS-03 | CAMSHAFT DRIVE GEAR * | 25.00 | YES | 1 | |||||||
| FCIS-04 | DISTRIBUTOR DRIVE SHAFT * |
 |
45.00 | YES | |||||||
| FCIS-04-ASM | DISTRIBUTOR DRIVE SHAFT ASSEMBLY: SHAFT, 2 BEARINGS, PINION GEAR, PIN)* |
 |
80.00 | YES | 1 | ||||||
| FCIS-05 | DRIVE SHAFT PINION GEAR * |
 |
25.00 | YES | 1 | ||||||
| FCIS-06 | DRIVE SHAFT PINION GEAR LOCK PIN * | .50 | YES | 1 | |||||||
| FCIS-07 | UPPER BRONZE BEARING * | 10.00 | YES | 1 | |||||||
| FCIS-08-1 | UPPER BEARING LOCK SCREW * | .50 | YES | 1 | |||||||
| FCIS-08 | LOWER BRONZE BEARING * | 5.00 | YES | 1 | |||||||
| FCIS-10 | CAMSHAFT THRUST BRASS BOLT * | 12.00 | YES | 1 | |||||||
| FCIS-11 | CAMSHAFT THRUST JAM NUT * | 2.00 | YES | 1 | |||||||
| FCIS-12 | DISTRIBUTOR LOCK BOLT * | 1.00 | YES | 1 | |||||||
| FCIS-13 | DISTRIBUTOR LOCK JAM NUT * | 1.00 | YES | 1 | |||||||
| FCIS-TG | TIMING COVER GASKET* "BEST BRAND" - 0.019" THICK | 4.00 | YES | 1 | |||||||
| FCIS-14 | FREEZE PLUG TO TEMP SEAL HEAD'S DISTRIBUTOR HOLE * | 2.00 | YES | 1 | |||||||
| W-CST | WING BODY, CAP AND ROTOR WITH SPARK PLUG TIPS - CUSTOM MADE SET - FIT STOCK MODEL A & B FORD AND FSI "ZIPPER" BRAND DISTRIBUTORS - NO WIRES | DETAILS |
 |
68.00 | LIMITED | 1 SET | |||||
| W-LSH | WINGED BODY, CAP, ROTOR & CLOTH WIRE SET - LION SIZED - SET - FIT STOCK MODEL A & B FORD AND FSI "ZIPPER" BRAND DISTRIBUTORS | DETAILS |
 |
89.00 | YES | 1 SET | |||||
| W-LSH-W | WIRE SET ONLY - FIT LION HEAD - YELLOW CLOTH - SOLID COPPER CORE - 5 WIRES/ENDS. |
 |
32.00 |
LIMITED SPECIAL ORDER |
1 SET | ||||||
|
RILEY TWO PORT (tm) OHV CONVERSION & PARTS |
|||||||||||
|
|
R-1-7
|
RILEY TWO PORT - OHV - CONVERSION KIT - 6.5 CR IN STOCK |
DETAILS
|
 |
4650.00 |
IN STOCK
|
1 | ||||
| R-INSTR | RILEY - INSTRUCTION BOOKLET - COVERS HISTORY & INSTALLATION | 15.00 | YES | 1 | |||||||
| R-6-0P2 | RILEY - DISTRIBUTOR RISER - MACHINED FOR OIL PRESSURE - INCLUDES TAPPED COMPRESSION FITTING, LOCKER SCREW AND JAM NUT. |
 |
78.00 | LIMITED | 1 | ||||||
| R-6-OR | RILEY - OIL RESTRICTOR - BLANK (2 PCS) - YOU DRILL TO SIZE - .060" RECOMMENDED | 3.50 | YES | 1 | |||||||
| R-6-COMP | RILEY - OIL COMPRESSION FITTING - 90 DEG - TAPPED FOR RESTRICTOR | 6.50 | YES | ||||||||
| R-6-A | RILEY - DISTRIBUTOR DRIVE SHAFT | 22.00 | YES | 1 | |||||||
| R-12-L | RILEY - HEAD STUD - LONG - GRADE 8 - ROLLED THREADS | 6.50 | YES | 4 | |||||||
| R-12-BS | RILEY - HEAD BOLT SET - REPLACES STUD KITS - GRADE 8 (10 PCS) + 4 LONG STUDS - SIZED FOR YAPP REPRO HEADS - FULL STUDS KITS ARE DISCONTINUED. | 86.00 | YES | 1 | |||||||
| R-7-NN | RILEY - INTAKE PORT COVER - NO NAME - EA |
 |
14.00 | YES | 2 | ||||||
| R-15-SB | RILEY - PUSH ROD SEAT BOLTS (4 PCS) | 9.00 | YES | 1 SET | |||||||
|
R-15-C |
RILEY - PUSH ROD - SOLID - 1 COMPLETE UNIT (3 PCS) | 38.00 | YES | 4 | |||||||
| R-15 | RILEY - PUSH ROD - SOLID (1 PC) | 25.00 | YES | 4 | |||||||
| R-15-B1 | RILEY - PUSH ROD - TOP ADJUST NUT & JAM NUT - 2PCS | 18.00 | YES | 4 | |||||||
| R-2-3 | RILEY - ROCKER STANDS (2) WITH ADJUSTABLE ROCKER ARMS (4) - CONVERSION KIT - RETRO FITS TO ALL ORIGINAL AND REPRO RILEY 2 PORT HEADS - COMPLETE. * ITEMS IN KIT |
 |
874.00 | YES | 1 | ||||||
| R-2-SET | RILEY - ROCKER ARM SET (4) COMPLETE SET WITH NEEDLE BRGS, ALL HARDWARE, TO REPLACE ORIGINAL OR BRONZE ROCKERS. R-4-T REQUIRED. FIT 5/8" SHAFT ONLY. |
 |
624.00 | YES | 1 | ||||||
| R-3-AB | RILEY - ROCKER ARM - ADJUSTER BOLT -10MM* | 17.00 | YES | 8 | |||||||
| R-3-JN | RILEY - ROCKER ARM - JAM NUT - 10MM* | 1.00 | YES | 8 | |||||||
| R-3-D-M | RILEY - ROCKER ARM - ADJUSTABLE - DUCTILE IRON - MACHINED* THIS PRICE IS FOR ONLY THE MACHINED CASTING. | 125.00 | YES | 4 | |||||||
| R-3-B RILEY | RILEY - ROCKER ARM - BUSHING - OBSOLETE (#1- #61 HEADS USE THESE) | 4.00 | YES | 2 - 8 | |||||||
| R-3-LW | RILEY - ROCKER ARM - LOCK WASHER (SPECIAL NOR LOCK)* | 2.50 | YES | 8 | |||||||
| R-3-BRG | RILEY - ROCKER ARM NEEDLE BEARING - 2 PER ROCKER* | 13.50 | YES | 2 - 8 | |||||||
| R-2-SHFT | RILEY - ROCKER SHAFT 5/8" DIA. (YAPP R2P USE THIS SIZE)* | 36.00 | YES | 4 | |||||||
| R-2-NOS | RILEY - ROCKER SHAFT 9/16" DIA. - NOS (ORIGINAL SIZE) GEO. RILEY USED PISTON PINS | 20.00 | YES | 4 | |||||||
| R-2-BLT | RILEY - ROCKER STAND BOLT - 3.50" + FLAT WASHER* | 2.50 | YES | 4 | |||||||
| R-2 | RILEY - ROCKER STAND - MACHINED* | 110.00 | YES | 2 | |||||||
| R-4-S | RILEY - VALVE COVER - SHORT - ORIGINAL SIZE - STUD BOSS IS CENTERED. |
 |
62.00 | YES | 2 | ||||||
| R-4-T | RILEY - VALVE COVER - TALL - USED WITH ADJUSTABLE ROCKERS* | 85.00 | YES | 2 | |||||||
| R-5 | RILEY - WATER GOOSE NECK |
 |
89.00 | YES | 1 | ||||||
| R-WN | RILEY - VALVE COVER WING NUT & SEALING WASHER (2 PC) SET | 11.25 | YES | 1 SET | |||||||
| R-WN-W | RILEY- VC SEALING WASHER - EACH | 1.00 | YES | 2 | |||||||
|
ROOF 101 CYCLONE FOUR PORT OHV CONVERSION KIT & PARTS |
|||||||||||
| 101-1 | ROOF 101 CYCLONE 4 PORT OHV CONVERSION - 6.5:1 CR KIT | DETAILS |
 |
4,650.00 |
SOLD OUT Interested? Please Call
|
1 KIT | |||||
| 101-07 | ROOF 101 CYCLONE INSTRUCTION BOOK | 15.00 | YES | 1 | |||||||
| 101-08 | ROOF - 4 PORT INTAKE MANIFOLD - 3 CARBS PLUS WATER JACKET - OWNERS ONLY |
 |
280.00 | SOLD OUT | 1 | ||||||
| 101-08.1 | ROOF - 101 - MANIFOLD CARBURETOR MOUNT COVERS | 20.00 | YES | 1 - 3 | |||||||
| 101-03 | ROOF - DISTRIBUTOR RISER - MACHINED - REQUIRES 101-03-2 | 75.00 | YES | 1 | |||||||
| 101-03-2 | ROOF - DIST RISER DRIVE SHAFT - LONG - USED WITH 101-03 | 24.00 | YES | 1 | |||||||
| 101-03.1 | ROOF - DISTRIBUTOR DRIVE SHAFT - SHORT | 22.00 | YES | 1 | |||||||
| 101-10.1 | ROOF - NAME PLATE MEDALLION - BLUE & BRASS CLOISONNÉ - *FOR 101 OWNERS ONLY | 39.95 | SOLD OUT | 1 - 4 | |||||||
| 101-02.2 | ROOF - ROCKER STUD | 23.00 | YES | 4 | |||||||
| 101-02.3 | ROOF - PUSH ROD - SOLID | 25.00 | YES | 4 | |||||||
| 101-02.4 | ROOF - PUSH ROD GUIDE PLATE | 17.00 | YES | 4 | |||||||
| 101-02.6 | ROOF - PUSH ROD SEAT BOLT - 3/8-24 X1-1/4" - (4 PCS) | 9.00 | YES | 1 SET | |||||||
|
101-02.7 |
ROOF - CHROME ACORN NUT & SEALING WASHER (2 PCS) | 4.00 | YES | 4 | |||||||
| 101-02.9 | ROOF - ROLLER ROCKER ARM - 1.5:1 RATIO - BALL, POLYLOCK, AND JAM NUT | 19.00 | YES | 4 | |||||||
| 101-02.12 | ROOF - VALVE SPRING - SPECIAL | 6.00 | YES | 8 | |||||||
| 101-01.02 | ROOF - HEAD STUD KIT - 14 PCS GRADE 8 | 89.00 | LIMITED | 1 SET | |||||||
| 101-01.05 | ROOF - ROCKER BOX TO HEAD ALIGNMENT SHOULDER BOLT | 8.50 | YES | 6 | |||||||
| 101-05.01 | ROOF - GASKET - INTAKE MANIFOLD TO ROCKER BOX - 4 PCS | DETAILS | 6.50 | YES | 1 SET | ||||||
| 101-05.02 | ROOF - GASKET - "F" CYLINDER HEAD - "BEST" - SPECIAL GASKET ONLY FITS THE ROOF 101 |
DETAILS
|
|
62.50 | YES | 1 | |||||
| 101-05.03 | ROOF - GASKET - WATER PUMP - B | DETAILS | 3.00 | YES | 1 | ||||||
| 101.05.04 | ROOF - GASKET - CARBURETOR TO MANIFOLD - OVAL TWO BOLT | DETAILS |
|
3.00 | YES | 1 - 3 | |||||
| 101.05.05 | ROOF - GASKET - O-RING SET - 10 PCS |
DETAILS
|
 |
12.00
|
YES | 1 | |||||
| 101-05.09 | ROOF - GASKET - FIRE WIRE -2 PCS |
3.00
|
YES | 1 | |||||||
|
101-04
|
PORT COVERS - NO NAME - ALL "F" HEADS |
|
13.50 | YES | 2 | ||||||
|
101-02.17
|
VALVE PLUGS - ALL "F" HEADS |
|
13.50 | YES | 4 | ||||||
|
THE SECRETS OF SPEED SOCIETY |
|||||||||||
| SOSS | DUES - 3RD CLASS BULK - USA - 20 TO 30 DAYS DELIVERY - NOT FORWARDED | 1YR | DETAILS | 38.00 | |||||||
| SOSS | DUES - 1ST CLASS MAIL - USA - 3 TO 5 DAYS DELIVERY - FORWARDED | 1YR | DETAILS | 45.00 | |||||||
| SOSS | DUES - CANADA AND MEXICO - GROUND FIRST CLASS MAIL - 5-10 DAYS DELIVERY | 1YR | DETAILS | 48.00 | |||||||
| SOSS | DUES - OVERSEAS - 10 TO 30 DAYS DELIVERY | 1YR | DETAILS | 55.00 | |||||||
| SOSS | SECRETS MAGAZINE - BACK ISSUE - ONE COPY - POSTAGE PAID - REQUEST VOL# - NOT ALL ISSUES ARE IN STOCK - GENERALLY ONLY THE NEWEST 20 OR SO. | EACH | DETAILS | 12.00 pp | YES | ||||||
| SOSS | SECRETS MAGAZINE - GRAB BAG OF 18 ISSUES + POSTAGE (USA $14.00) (CANADA $28.00) (OVERSEAS $55.00) SOSS MEMBERS TAKE OFF 10% ($99.00). | DETAILS |
 |
125.00 | YES | ||||||
| SOSS | INDIVIDUAL ARTICLES FROM OUT-OF-PRINT SECRETS MAGAZINE ISSUES - SPECIAL SERVICES - RESEARCH - SEE "DETAILS" FOR INFO. | DETAILS | SPECIAL ORDER | ||||||||
| NEW U.S.A. MEMBERS RECEIVE: THE LAST 2 ISSUES OF SECRETS MAGAZINE (USA), CLUB DECAL, UNLIMITED USE OF CLASSIFIED ADS AND 10% OFF PARTS (NOT OHV CONVERSIONS) |
 |
||||||||||
| ORDER FORM - PRINT OUT AND MAIL OR FAX BACK | DETAILS | ||||||||||
|
HOME - CONTACT
- SOCIETY -
PARTS - MAGAZINE
- LINKS OFFICE 513-724-0700 - FAX 513-724-0116 - EMAIL CONTACT |
|||||||||||
