SOSS INDEX

Ignitions

Updated 5/6/2021

TIMING COVER 

Out of stock - Accepting deposits for next run

Timing Cover Ignition System 

 $625.00
 
Replaces timing cover on Ford Model A & B engines. Complete kit includes timing gear gear-nut, pinion gear-shaft, cover gasket, thrust control and hardware.

Uses any distributor or Magneto made to fit classic VW Beetles.
Shaft runs clock-wise.
Distributor must be calibrated to Banger RPM range.
Used for race cars to lower ignition.
Can be used as a second ignition source for aircraft and for dual spark cylinder heads. . . . or just to be different with your daily driver. . . . Have more fun than the other guys!!

Special made and hardened cam nut is fitted with 1953 Ford ignition drive gear, it drives a Ford pinion gear and custom shaft.  
Camshaft thrust is adjustable by screwing in/out an oversized manganese bronze screw and lock nut.
The timing pin position is set for TDC.
The cover was created and based on 1929 Ford prints.
Made of fine grained 356-T6 aluminum for a super fine surface quality.

Front  Cover  Distributor  (CW) 
SPECIAL  FOR
FRONT COVER KIT 

DISTRIBUTOR
Performance
FOR OUR FRONT COVER KIT
This Electronic Distributor is for our
Front Cover Ignition System 
It is a Clock Wise (CW) rotation.
Specially machined to fit our
Front Cover Ignition System (FCIS).
Can be professionally tuned for most street or racing conditions.  
Works with all engine modifications.
Electronic, centrifugal advance, comes with coil.

TO PURCHASE THIS DISTRIBUTOR 
CONTACT "FSI" DIRECTLY AT:  580-762-8322

Any VW Beetle Distributor or Magneto will fit and work.
The internal springs must be changed out
to reduce the full advance to 2000 RPM.
The FSI units are electronic, spun, adjusted and ready to rock.

DISTRIBUTORS  FOR PERFORMANCE

DISTRIBUTOR 
Fits Model A and B Fords.
Electronic, 12V, Automatic Centrifugal Advance, CCW rotation.
Centrifugal advance distributor loaded with Pertronix electronics
for long lasting trusted performance.
Never set points again!
A great choice for high compression head conversions.
Accurate advance can be tuned for stock to extreme RPMs.
Kit includes all connections,  coil, rotor and instructions.

TO PURCHASE THIS DISTRIBUTOR
 CONTACT FSI DIRECTLY AT:
580-762-8322
DISTRIBUTOR - Zipper
Fits  all Model A and B Fords.
GET THE LOOK OF STOCK 
and the performance of Electronics,
12V, with Centrifugal Advance built in.
Brand new cast iron distributor loaded with
Pertronix centrifugal advance electronics
for long lasting trusted performance.
A great choice for high compression head conversions.
Kit includes coil, armored ignition cable, wires,
stock Model A wing-ignition cap, body, rotor & instructions.
THE SPARK CONTROL ROD AND LEVER ARE NOT USED.
Round modern caps available.

TO PURCHASE THIS DISTRIBUTOR 
CONTACT "FSI" DIRECTLY AT:  
580-762-8322
Use this Form to email questions or orders
Scalded Dog Speed Parts, 3860 Cain  Run Rd, Batavia OH 45103, USA .
Phone (513) 724-0700, EST.   Use contact form to contact.