Side Valve Cover Plate Model A                                                        
$85.95                                  
IN STOCK 
Cast Aluminum.
Stock appearance with a recess to add a name plate.
Has extra boss to drill and tap for oil and filter provisions.

Side Valve Cover Plate - Model B                                                      
$85.95                                  
IN STOCK
Cast Aluminum.
Stock appearance with a recess to add a name plate.
Has extra bosses to drill and tap for oil and filter provisions.

Valve Cover - Finned
$80.00
IN STOCK 
Uses the 1930-31 side oil return pipe (It's a bit longer).

Driver's Side lower finned plate - Model A & B*                                                   
$60.00                                  
IN STOCK
Cast Aluminum.  Fins match the valve cover plate above.
Comes with eye bolt hardware to install.
This is the original Finned plate made from original wooden patterns.
* This plate will fit Model B engines if the Model A oil filler pipe is used.

Lion Upper Driver's side finned plate  (A-B-T)            
$58.95                                    
IN STOCK  - LIMITED . . .WHEN STOCK IS SOLD OUT . . .THAT'S IT.
Cast aluminum. Plate is mounted under the side water inlet.
Requires an extra water inlet gasket. Not included.

Fuel Pump Cover plate - Model B                                                                         
$18.00  
IN STOCK
Just the plate . . .made from old wooden pattern.
Aluminum casting.

Lion Logo Medallion                                             
$18.00                          
IN STOCK

Has 2 large bosses on back to assist in mounting to license plate or our onto finned side plates.
Aluminum casting.
Requires drilling and tapping of bosses.